產品介紹
電磁式流量計 ALMAG
- Line Sizes : 3/8" - 110" (6-2800mm)
- Pressures : 580 psig(4.0Mpa) for line sizes up to 3" (80mm)
- Temperatures : 5~+160 °F( -20~ +70 °C) - Integral,(-40 ~ +360°F (180°C) - Remote
- Process connections : Wafer, ANSI or DIN Flanges, Insertion-Type
- Accuracy : std - ±0.5% / opt - ±0.2%
- Outputs : Pulse, 4-20mA, MODBUS, HART
- Special Features : Conductivity > 5 µS/cm, velocity 0.2 - 12 m/s
- Approvals : CE, ExdIIBT3~T6 (ATEX)
- Display Types : Integral and Remote
Battery Powered電磁流量計 ALMAGBAT
- Available in ¼" - 24" (3-600 mm) line sizes
- Will measure a wide range of fluid velocities; 0-50 feet/sec (0-15 m/s)
- GPRS, CDMA and SRD radio communications available
- Conductivity of measured medium: ≥ 20 μs/cm
- IP68 enclosure; suitable for underground applications
- Available FEP liner suitable for vacuum applications
- Excellent accuracy; ±0.5% of reading
- Empty pipe, current excitation and remaining battery life alarms
- NIST traceable calibration certificate
插入式電磁式流量計 ALMAGIS
- Applicable sizes: 2"~120" (50~3000 mm)
- Operating pressure: = 230 psig (1.6MPa) max.
- Velocity range of 3-33 fps (1~10m/s)
- Accuracy: ±1.5%
- Hot-tap ball valve option allows sensor to be installed and retracted from process piping without shutting down the process
- Conductivity of measured medium: ≥ 20 μs/cm
- Electrode materials: 316L, Hastelloy, Ti, Ni, Tantalum
- Max. distance between sensor and converter: 165 feet (50 m)
- NIST traceable calibration certificate
科里奧力質量流量計 ALCM-MB
- Suitable for aggressive & contaminated media
- Measurement of mass flow, density, temperature & volume flow
- High rotation frequency & well-balanced measuring tubes
- Excellent purging & sterilization capabilities thanks to a construction that is free of dead spots
- Operates at temps up to 575°F (300°C)
- Individual 8-point-calibration including report
- Optional EX protection
- Flow Range : 3,300 ~ 2,200,000 lb/hr (1,500~1,000,000 kh/hr)
- Size : 1/2"~8" (15~200 mm) Flanged (ANSI, DIN, Tri-Clamp®)
- Tube geometry : U-Tube with MIcro Bend)
科里奧力質量流量計 ALCM-DT
- Measurement of mass flow, density, temperature & volume flow
- Suitable for aggressive & contaminated media
- Measurement & display of percent water-cut for oil/water mixtures
- Excellent purging & sterilization capabilities thanks to dead spot-free construction
- High rotation frequency & well-balanced measuring tubes
- Operates at temperatures up to 575°F (300°C)
- Individual 8-point calibration including NIST-traceable report
- Optional EX protection
- Flow Range : 150 ~ 900,000 kg/hr
- Size : 1/2" ~ 8"(15~200 mm)
科里奧力質量流量計 ALCM-UT
- Suitable for aggressive & contaminated media
- Measurement of mass flow, density, temperature & volume flow
- Measurement & display of percent water-cut for oil/water mixtures
- Excellent purging & sterilization qualities thanks to a construction that is free of dead-spots
- High rotation frequency & well-balanced measuring tubes
- Operating temperatures up to 575°F (300°C)
- Individual 8-point calibration including NIST-traceable report
- Optional EX protection
- Flow Range : 1,500~1,000,000 kg/hr
- Line Sizes : 1¼”~8” (40-200 mm)
夾管式超音波流量計 ALSONIC FX
- 2 line LCD display with flowrate, totalizer & signal condition
- Stores up 64 day/months totalizer daily value
- Batch control function
- Wide range of velocities, from ±0.03 to ±105 feet/sec
- Transducers for pipe sizes ranging from ½" to 240" (13 to 6000 mm)
- High accuracy: ± 0.5% of reading
- Clamp on flow meter transducers feature integral magnet for installation on metal pipe without use of a mounting belt
- Data logger function includes date, totalizer, & signal condition diagnostic
- Fast response time: less than 1 second
熱質式質量流量計 ATMF8000 IS
- Direct mass flow measurement of any gas with actual gas calibration
- Opto-isolated outputs, with graphic display
- Tracking of overall gas consumption over a turndown ratio of at least 100:1
- Up to four independent, switchable flow curves
- High contrast photo-emissive OLED display with rate, total, temperature and graphic display
- User-selectable engineering units, dynamically converts the flow rate and total flow
- Can measure higher velocity than any other thermal mass meter - up to 203 m/s
- Display calibration milliwatt (mw) for ongoing diagnostics
- Standard software available multi-curve fit programs
- Low power dissipation under 2W
- Hot-tap ball valve kit available
金屬管變面積式流量計 ALVAMT
- Versatile design may be used for gas, steam, and liquids
- High resolution and fast response time; - 5 to 50 msec
- Wide temperature range from -40 up to 750 °F (-40 to 400 °C)
- High pressure operation up to 6100 psi (420 bar)
- Process connections including NPT threads, ANSI flanged, & Tri-Clamp available
- Electronics either intrinsically safe EEx ia II CT5, or Ex proof EEx d II CT6
- Wide array of materials available including Hastelloy B & C,Ti, Cu, Al, etc..
- PTFE and other liner materials available
- NIST-traceable calibration
Vortex渦流式流量計 ALVT系列
- Suitable for a wide variety of applications with steam, gas, and liquid medias
- No moving parts, high reliability and durability
- Piezo-electric sensor isolated from the process fluid
- Error messages displayed for or erratic flows and flows outside of calibrated ranges
- Field calibration possible with integral or remote electronics and keypad
- True 2-wire 4-20 mA interface
- Wide measuring range, turn-down ratio of 10:1
- Insertion meters can be installed vertically, horizontally or in angled pipelines
- Available and an integrated mass flow vortex
- ALVTIS (insertion) can be hot-tapped with ball valve and retractable assembly
- Suitable for a wide variety of applications with steam, gas, and liquid medias
- No moving parts and no leak paths; no o-ring or graph oil seals to wear, fail or leak
- Two independent sensors , allowing for better signal amplification and noise reduction
- Error messages displayed for or erratic flows and flows outside of calibrated ranges
- Field calibration possible with integral or remote electronics and keypad
- True 2-wire 4-20 mA interface
- Wide measuring range, turn-down ratio of 30:1
- Insertion meters can be installed vertically, horizontally or in angled pipelines
- Can measure at Reynolds Numbers ranging from 10,000 to 7,000,000
- Weather proof multi-pole connector for power, signal and serial interface
- ALVTN (insertion) can be hot-tapped with ball valve and retractable assembly
- ALVTN (inline) can have reduced flow body for lower flows (see drawings) than standard sizes